Com port pinout assignments, Table a-13 com port pin assignments, Regulatory compliance – Enterasys Networks Enterasys Matrix 6H303-48 User Manual
Page 79: Table a-14 compliance standards
COM Port Pinout Assignments
Matrix DFE-Gold Series Installation Guide A-7
COM Port Pinout Assignments
The COM port is a serial communications port for access to Local Management. Refer to
for the COM port pin assignments.
Regulatory Compliance
The 4G4202‐72 and 4G4282‐49 meet the safety and electromagnetic compatibility (EMC)
requirements listed in
Table A-13 COM Port Pin Assignments
Pin
Signal Name
Input/Output
1
Transmit Data (XMT)
Output
2
Clear to Send (CTS)
Input
3
Data Set Ready (DSR)
Input
4
Receive Data (RCV)
Input
5
Signal Ground (GND)
NA
6
Request to Send (RTS)
Output
7
Data Terminal Ready (DTR)
Output
8
Data Carrier Detect (DCD)
Input
Table A-14 Compliance Standards
Regulatory Compliance
Standards
Safety
UL 60950, CSA C22.2 No. 60950, 2006/95/EC, EN 60950,
IEC 60950, EN 60825, 21 CFR 1040.10.
Electromagnetic Compatibility
(EMC)
47 CFR Parts 2 and 15, CSA C108.8, 2004/108/EC, EN
55022, EN 61000-3-2, EN 61000-3-3, EN 55024, AS/NZS
CISPR 22, VCCI V-3.