Enterasys Networks Enterasys Matrix 6H303-48 - Manual (Page 59)

Connecting to COM Port for Local Management
Matrix DFE-Gold Series Installation Guide 3-27
5. With a PC connected to a remote modem, you can configure the switch remotely. To
accomplish this, you must configure your PC VT emulation package with the
following parameters.
6. When these parameters are set, the Local Management password screen will display.
Refer to the Matrix DFE‐Gold Series Configuration Guide for further information.
Figure 3-17 Connecting to a Modem
Parameter Setting
Mode 7 Bit Control
Transmit Transmit=9600
Bits Parity 8 Bits, No Parity
Stop Bit 1 Stop Bit
1 UTP straight-through cable with RJ45 connectors 4 Local modem
2 RJ45 COM port 5 Remote modem
3 RJ45-to-DB25 modem adapter 6 Remote PC
COM
OFFLINE/
RESET
GROUP 3 GROUP 1 GROUP 2
CPU
MGMT
1X
6X
4G4202-72
Gb ENET
Б
Д В Г А Е