Enterasys Networks Enterasys Matrix 6H303-48 - Manual (Page 81)

Matrix DFE-Gold Series Installation Guide B-1
B
Mode Switch Bank Settings
and Optional Installations
This appendix covers the following items:
Required Tools
Use the following tools to perform the procedures provided in this appendix:
• Antistatic wrist strap
• Phillips screwdriver
Setting the Mode Switches
For information about... Refer to page...
Required Tools B-1
Setting the Mode Switches B-1
Memory Locations and Replacement Procedures B-3
Caution: An antistatic wrist strap is required to perform the following procedures
to minimize ESD damage to the devices involved.
Precaución: Para minimizar los efectos de las descargas de electricidad
estática, deberá utilizar una pulsera antiestática al realizar los siguiente
procedimientos.
Caution: Read the appropriate sections to be fully aware of the consequences
when changing switch settings.
Only qualified personnel should change switch settings.
Precaución: Si desea modificar la configuración del interruptor, lea las
secciones correspondientes para saber cuál será el resultado de hacerlo.
Estas modificaciones a la configuración sólo debe realizarlas personal calificado.