Use locations, Tool button, Use locations -36 tool button -36 – HEIDENHAIN ND 1200T User Manual

Page 88

Text mode
Original mode

Chapter 3

Setup

3-36

Use Locations
This option selection field enables the Tool Loc field found on the
tool setup screen. Press the yes softkey to enable this function or
the no softkey to disable it. This option selection field requires
the supervisor password to be entered prior to access.

Tool Button
This option selection field determines the navigation result when
the tool key is pressed. Press the new softkey to bring up the new
Tool setup screen when the tool key is pressed. Press the select
softkey to bring up the select tool screen when the tool key is
pressed. This option selection field requires the supervisor pass-
word to be entered prior to access.