HEIDENHAIN ND 1200T - Manual (Page 17)

Introduction
About this manual
The material in this guide is divided into 4 chapters ranging from
introductory material to advanced topics. If you are an advanced
user of tool presetter readouts, feel free to skim the material con-
tained in this guide, but do not begin to operate the readout
unless you’re confident that you understand the essential infor-
mation contained in these chapters. Observe all precautions and
safety rules while using this equipment.
After an initial review, this guide will become an invaluable refer-
ence source that can be used routinely to answer questions and
ensure smooth continued operation of the Tool-Chek. The com-
prehensive table of contents and index facilitate rapid access to
specific information contained within the guide.
Who should read
this guide
This user’s guide is intended for operators, technicians, supervi-
sors and dealer representatives.
What this guide
covers
Chapter 1: Overview
An overview of TC200 system including specifications.
Chapter 2: Operation
Demonstration of TC200 operation for getting started with a mini-
mum of details.
Chapter 3: Setup
Contains an explanation of the various menu functions found on
the TC200.
Chapter 4: Communications
Serial (RS232) and parallel communication with printers and IBM-
compatible personal computers.
i