HEIDENHAIN ND 1200T - Manual (Page 5)

Safety and
Maintenance
Considerations
General safety precautions must be followed when operating the
system. Failure to observe these precautions could result in dam-
age to the equipment, or injury to personnel. It is understood
that safety rules within individual companies vary. If a conflict
exists between the material contained in this guide and the rules
of a company using this system, the more stringent rules should
take precedence.
Although Metronics strongly recommends that you read all parts
of this guide, it is essential for reliable and safe operation to read
the first portions up to and including Chapter 2: Operation, prior
to operating the TC200.
Location and
Mounting
The TC200 must be placed or mounted on a stable, reliable sur-
face. If the TC200 should fall, it could become seriously damaged
and more importantly could cause injuries to the user.
Cleaning
Use only a cloth dampened with water and a mild detergent for
cleaning the exterior surfaces. Never use abrasive cleaners, and
never use strong detergents or solvents. Only dampen the cloth,
do not use a cleaning cloth that is dripping wet.
Electrical
Do not allow the power cord to be located such that it can be