HEIDENHAIN ND 1200T - Manual (Page 20)

Introduction
iv
System configuration
and setup
Metronics, Incorporated assumes that all TC200 systems will be
configured and setup for the end-user by dealer representatives
or OEMs. This setup includes calibration according to the user’s
tool presetter if needed.
When the end-user installs a new tool presetter, it will probably
be necessary to perform configuration and setup again. In that
case, contact their dealer representatives for assistance.
WARNING WARNING WARNING WARNING WARNING
There is never any reason to open the TC200 enclosure. There
There is never any reason to open the TC200 enclosure. There There is never any reason to open the TC200 enclosure. There There is never any reason to open the TC200 enclosure. There There is never any reason to open the TC200 enclosure. There
are no user-serviceable components or assemblies inside. As
are no user-serviceable components or assemblies inside. As are no user-serviceable components or assemblies inside. As are no user-serviceable components or assemblies inside. As are no user-serviceable components or assemblies inside. As
with any electronic instrument, there is a danger of electrical
with any electronic instrument, there is a danger of electrical with any electronic instrument, there is a danger of electrical with any electronic instrument, there is a danger of electrical with any electronic instrument, there is a danger of electrical
shock and damage to the instrument if the enclosure is opened.
shock and damage to the instrument if the enclosure is opened. shock and damage to the instrument if the enclosure is opened. shock and damage to the instrument if the enclosure is opened. shock and damage to the instrument if the enclosure is opened.
Refer all maintenance requirements to your original dealer
Refer all maintenance requirements to your original dealer Refer all maintenance requirements to your original dealer Refer all maintenance requirements to your original dealer Refer all maintenance requirements to your original dealer, or , or , or , or , or
failing that to Metronics Incorporated. failing that to Metronics Incorporated. failing that to Metronics Incorporated. failing that to Metronics Incorporated. failing that to Metronics Incorporated.