HEIDENHAIN ND 1200T - Manual (Page 38)

Chapter 2 Operation
2-12
Step 11
Align the setting gage with the crosshairs on the tool presetter
and press enter. The TC200 will store the setting gage in its
memory.
To measure and store a tool
Step 1
From the feature selection keys press tool. The LCD displays the
New Tool screen.
Step 2
Use the numeric keypad to enter a number for the tool and press
enter.
Step 3
Position of tool (POT) refers to a tools location in a tool changer
mechanism. Use the numeric keypad to enter a value between 1
and 99 then press enter.
Step 4
Nominal X is the diameter or radius of the tool. Use the numeric
keypad to enter a value for nominal X and press enter.