Unit of measure (linear), Help 2-5, Help – HEIDENHAIN ND 1200T User Manual

Page 31: Unit of measure, Unit of measure (linear) -5

Text mode
Original mode

Tool-Chek

TC200

2-5

the zero key. Pressing the Absolute/Incremental mode key a sec-
ond time will return both axes to absolute. Both axes are can be
changed to incremental by simply pressing the zero button and
following the on-screen instructions.

Unit of measure (Linear)
Features can be displayed in mm or inches. Select the desired unit
of measure if necessary by pressing the mm/inch mode key. The
unit of measure will be displayed at the upper right corner of the
LCD. This selection can be changed at any time.

Help
Displays help text on the screen explaining the current function or
LCD screen.