HEIDENHAIN ND 1200T - Manual (Page 100)

Chapter 4 Communications
4-6
Print Labels
Enables or disables tool label print function. Use the softkeys to
select yes or no. This option selection field requires the supervisor
password prior to access.
Print POT
Press the yes softkey to include the POT (position of tool within
tool changer) on the printed label. Press the no softkey to ex-
clude the POT. This option selection field requires the supervisor
password prior to access.
Num Label Lines
Use the numeric keypad to enter the desired number of lines for
labels. This data entry field requires the supervisor password prior
to access.
Num Skip Lines
Use the numeric keypad to enter the number of lines skipped
between printed lines. This data entry field requires the supervi-
sor password prior to access.
Amt Label Indent
Use the numeric keypad to enter the number of indent spaces for
labels. This data entry field requires the supervisor password prior
to access.
Glossary
Post Form: The purpose of a “Postform Character” is to output
a control character such as, Line Feed, Carriage Re
turn or any other ASCII Code control character, af-
ter each page is printed.
Post Line: The purpose of a “Postline Character” is to output a
control character such as, Line Feed,
Carriage Return or any other ASCII Code control
character, after a line is printed.
Pre Form: The purpose of a “Preform Character” is to output
a control character such as, Line Feed, Carriage Re
turn or any other ASCII Code control character, be-
fore each page is printed.