HEIDENHAIN ND 1200T - Manual (Page 78)

Chapter 3 Setup
3-26
Data/ Parallel Data
Reports of measurement data can be sent to the serial or parallel
port for printing. There are four softkey options for this field:
none, display, report, and both. Press the none softkey if no
printed reports are required. Press the display softkey to view
reports on the LCD display. Press the report softkey to print all
reports. Press the both softkey to display reports on the LCD and
print. This option selection field requires the supervisor password
prior to access. This option selection field requires the supervisor
password prior to access.
EOC Delay (end of character delay)
Use the numeric keypad to enter values up to 10,000 (1 second).
This setting determines the printer delay between printed charac-
ters. This data entry field requires the supervisor password prior
to access.