HEIDENHAIN ND 1200T - Manual (Page 64)

Chapter 3 Setup
3-12
Current Angular
Defines the default display of measured angles until the TC200 is
shutdown. At the next startup, the Startup Angular setting de-
fines the default display of measured angles. Options for this
field include DD (decimal degrees) and DMS (degrees, minutes,
and seconds). Selections for this field are made using softkeys.
Press the left arrow key or finish to return to the setup menu. Use
the up or down arrow keys to scroll through the setup menu and
highlight Encoders.
Encoders
The encoder setup screen contains 1 user level procedures and 7
supervisor level procedures. Users can observe the encoder setup
for the X and Z axes. Supervisors can input encoder resolution,
define encoder type, select reference marks, obtain machine zero,
reverse axis direction, enter interpolation values, and select units
of measure.
Press the right arrow key to select items in the right portion of the
screen.