Dms disp res 3-9, Dms disp res – HEIDENHAIN ND 1200T User Manual

Page 61

Tool-Chek

TC200

3-9

NOTE

NOTE
When inputting resolution remember that .0001in is a higher

When inputting resolution remember that .0001in is a higher

When inputting resolution remember that .0001in is a higher
resolution than .0002in. Therefore, any entry less than .0002in

resolution than .0002in. Therefore, any entry less than .0002in

resolution than .0002in. Therefore, any entry less than .0002in
exceeds the resolution of an encoder with .0002in resolution.

exceeds the resolution of an encoder with .0002in resolution.

DMS Disp Res
Defines the measurement resolution displayed on the TC200 for
angular information in degree, minute, and second format. Any
resolution at or below the resolution of the encoder is a valid
entry for this field. Do not enter a resolution higher than the
encoder resolution. Consult the encoder product information to
determine its resolution. This data entry field requires the super-
visor password prior to access.

NOTE

NOTE
When inputting resolution remember that .0001mm is a higher

When inputting resolution remember that .0001mm is a higher

When inputting resolution remember that .0001mm is a higher
resolution than .0002mm. Therefore, any entry less than

resolution than .0002mm. Therefore, any entry less than

resolution than .0002mm. Therefore, any entry less than
.0002mm exceeds the resolution of an encoder with .0002mm

.0002mm exceeds the resolution of an encoder with .0002mm

.0002mm exceeds the resolution of an encoder with .0002mm
resolution.

resolution.