HEIDENHAIN ND 1200T - Manual (Page 79)

Tool-Chek ® TC200
3-27
EOL Delay (end of line delay)
Use the numeric keypad to enter values up to 1,000,000 (1 minute).
This setting determines the printer delay between printed lines.
This data entry field requires the supervisor password prior to
access.
NOTE NOTE NOTE NOTE NOTE
Occasionally the data exchange rate between the TC200 and a
Occasionally the data exchange rate between the TC200 and a Occasionally the data exchange rate between the TC200 and a Occasionally the data exchange rate between the TC200 and a Occasionally the data exchange rate between the TC200 and a
printer can exceed the printer’s capabilities. If printing problems
printer can exceed the printer’s capabilities. If printing problems printer can exceed the printer’s capabilities. If printing problems printer can exceed the printer’s capabilities. If printing problems printer can exceed the printer’s capabilities. If printing problems
occur after printing has begun, set the EOC delay and EOL delay
occur after printing has begun, set the EOC delay and EOL delay occur after printing has begun, set the EOC delay and EOL delay occur after printing has begun, set the EOC delay and EOL delay occur after printing has begun, set the EOC delay and EOL delay
to the maximum values. If this eliminates the problem,
to the maximum values. If this eliminates the problem, to the maximum values. If this eliminates the problem, to the maximum values. If this eliminates the problem, to the maximum values. If this eliminates the problem,
experiment with lower settings to find the fastest working
experiment with lower settings to find the fastest working experiment with lower settings to find the fastest working experiment with lower settings to find the fastest working experiment with lower settings to find the fastest working
settings. Remember
settings. Remember settings. Remember settings. Remember settings. Remember, the maximum EOC and EOL delay insert a , the maximum EOC and EOL delay insert a , the maximum EOC and EOL delay insert a , the maximum EOC and EOL delay insert a , the maximum EOC and EOL delay insert a
1 second delay after each character and a 1 minute delay after 1 second delay after each character and a 1 minute delay after 1 second delay after each character and a 1 minute delay after 1 second delay after each character and a 1 minute delay after 1 second delay after each character and a 1 minute delay after
each line.
each line. each line. each line. each line.
Scroll through the Setup menu to highlight Squareness.