HEIDENHAIN ND 100 User Manual - Manual (Page 93)

ND 120 QUADRA-CHEK 93
2
.2
S
o
ft
wa
re
s
e
tu
p Saving an NLEC data .txt file
 Establish communication between the DRO and the computer. See
"Connecting a computer" on page 64.
 Open and connect to Hyperterminal. See "Connecting to
Hyperterminal" on page 65.
 In Hyperterminal, click Transfer>Capture Text... The Capture Text
window is displayed.
 In the Capture Text window, enter a location and filename for
capturing the NLEC data sent from the DRO.
 Click Start.
 On the DRO, press MENU>Setup to display the Setup menu.
 Use the Arrow keys to highlight the NLEC menu item.
 Highlight the NLEC choice field.
 Press the Data soft key then the Send soft key. A pop-up confirms
the data was successfully sent.
 Press the OK soft key.
 In Hyperterminal, click Transfer>Capture Text>Stop. The NLEC
data has been saved to the location and text file specified in the
Capture Text window.
Click Transfer>Capture Text... Enter a location and filename Click Start
Highlight the NLEC choice field and
press the Data soft key Press the Send soft key Press the OK soft key