HEIDENHAIN ND 100 User Manual - Manual (Page 80)

80 2 Installation and Specifications
2
.2
S
o
ft
wa
re
s
e
tu
p Stage squareness calibration
The Squareness screen contains data and choice fields for calibrating
the squareness of the measuring system. The calibration of stage
squareness requires the use of a certified square artifact.
To calibrate squareness:
 Align the squareness calibration artifact with the reference axis for
the squareness calibration. This axis will be the Master axis.
 Press MENU>Setup to display the setup menu and then highlight the
Squareness menu item.
 Highlight the Master Axis choice field and press a soft key to select
the reference (Master) axis for squareness calibration.
 Highlight the Angle data field and press the Teach soft key to begin
the squareness calibration.
 Follow instructions displayed on the LCD screen to complete the
calibration.
 Press the FINISH key.
Highlight the Squareness menu item Select a Master Axis Highlight the Angle data field and press
the Teach soft key