HEIDENHAIN ND 100 User Manual - Manual (Page 52)

52 1 Operation
1
.7 T
o
ler
a
nces
Example of applying a tolerance
In this example, a form tolerance (roundness) is applied to a circle
feature:
 Use the Arrow keys to highlight the desired feature in the feature list.
In this example, the circle feature is highlighted.
 Press the Tol soft key to display circle feature tolerance alternatives:
 Pos (Position)
 Form
 Runout
 Con (Concentricity)
 Press the soft key corresponding to the desired tolerance type to
display the data entry screen. In this example, the Form soft key was
pressed and the data entry screen for specifying the roundness
tolerance is displayed. Initially, the tolerance data field (Tol. Zone)
contains the measured deviation from ideal roundness.
Circle feature is highlighted using Arrow
keys Tol soft key is pressed to display
tolerance soft keys
Form soft key is pressed to display the
tolerance data entry screen