HEIDENHAIN ND 100 User Manual - Manual (Page 73)

ND 120 QUADRA-CHEK 73
2
.2
S
o
ft
wa
re
s
e
tu
p Sending and receiving settings data
The Supervisor screen contains tools for sending and receiving
configuration settings data. This eliminates the need to configure the
DRO manually using the setup screens. The settings data also
contains any error correction data that existed when the settings data
was saved to a computer. Settings data can be sent to or received
from a computer using Hyperterminal or a similar serial
communications application. Hyperterminal is used in this manual.
To send settings data to a computer:
 Establish communication between the DRO and the computer. See
"Connecting a computer" on page 64.
 Open and connect to Hyperterminal. See "Connecting to
Hyperterminal" on page 65.
 In Hyperterminal, click Transfer>Capture Text... The Capture Text
window is displayed.
 In the Capture Text window, enter a location and filename for
sending settings to.
 Click Start.
 On the DRO press MENU>Setup to display the Setup menu.
 Use the Arrow keys to highlight the Supervisor menu item.
 Highlight the Password data field, enter the password then press
the ENTER key.
Click Transfer>Capture Text... Enter a location and filename Click Start