HEIDENHAIN ND 100 User Manual - Manual (Page 92)

92 2 Installation and Specifications
2
.2
S
o
ft
wa
re
s
e
tu
p NLEC by importing an NLEC data .txt file
An NLEC data file created by measuring a certified calibration grid with
an ND 12x or other systems capable of generating NLEC data can be
used to provide NLEC correction data instead of measuring a
calibration grid with the target DRO system. The NLEC data file is
loaded from a computer using Hyperterminal or a similar serial
communications application. Hyperterminal is used in this manual.
To import NLEC data to a computer:
 Establish communication between the DRO and the computer. See
"Connecting a computer" on page 64.
 Open and connect to Hyperterminal. See "Connecting to
Hyperterminal" on page 65.
 On the DRO, press MENU>Setup to display the setup menu.
 Use the Arrow keys to highlight the NLEC menu item.
 Highlight the NLEC choice field.
 Press the Data soft key then the Receive soft key. A pop-up window
notifies to “Send NLEC data now...”
 In Hyperterminal, click Transfer>Send Text File...
 In the Send Text File window, select the NLEC data file to send to
the DRO and click Open.
 A pop-up will notify “The NLEC data was successfully loaded.
Reboot the system.” Reboot the DRO by powering-off the unit then
powering-on.
Highlight the NLEC choice field and
press the Data soft key Press the Receive soft key Click Transfer>Send Text File...