HEIDENHAIN ND 100 User Manual - Manual (Page 35)

ND 120 QUADRA-CHEK 35
1
.3 Pr
epar
ing t
o
Measur
e
Presetting the datum
Datums can be zeroed or preset. This example creates a preset
reference datum from a point feature.
 Press MENU>Extra>Preset>Enter to display the preset
screen.
 Press the desired Axis key and enter the preset value
for the axis.
 Press another Axis key if desired and enter the preset
value for that axis.
 Press the FINISH key to preset the datum to the
specified values.
PRESET Selected from EXTRA menu Preset values are entered Point is preset as datum