HEIDENHAIN ND 100 User Manual - Manual (Page 11)

ND 120 QUADRA-CHEK 11
Supervisor password
Critical setup parameters are password protected. Only qualified
personnel should be given password access to setup screen
parameters. This prevents inadvertent adjustments to the installation
setup parameters.
Enter the supervisor password
Press the MENU key to display the menu soft keys.
Press the Setup soft key to display the setup menu.
Navigate up or down in the menu to highlight the Supervisor menu
item using the Up/Down Arrow keys.
Navigate from the menu to the Password setup field using the
Right Arrow
key.
Enter the supervisor password 070583 using the numeric keypad.
Press the FINISH key to save the password and return
to the setup menu.
Press the FINISH key to return to the DRO.
Notice
The password is 070583.
Notice
Supervisors may wish to remove this page from the
Operating Instructions after initially setting up the readout
system. Retain in a safe place for future use.