HEIDENHAIN ND 100 User Manual - Manual (Page 22)

22 1 Operation
1
.2 Basic F
unctions
COMMAND keys Function
Enter data: Press the ENTER key to enter
points during feature measurements or to
enter values into configuration fields.
Pressing the ENTER key indicates that data
from a measurement or in a field is ready for
use.
Finish a measurement: Press the FINISH key
to complete a feature measurement. Pressing
the FINISH key a second time returns the user
to the DRO screen.
Delete data or features: Press the CANCEL
key to delete the last point entered, data in
configuration fields or any highlighted feature
from the feature list.
Quit current activity: Press the QUIT key to
abandon the current task and return to the
DRO screen or to exit the feature list.
HELP key Function
Provide help: Press the Help key to display
help topics on the screen. Help topics explain
how to use the current function.
AXIS keys Function
Zero an axis: Press the axis key to the right
of the desired axis to zero the axis position
value when establishing a zero datum.
Preset an axis or axes: Press one or more
axis keys to the right of the desired axis or
axes when presetting axis position values for
a new datum.
SEND key Function
Transmit measurement results: Press the
Send
key to transmit measurement data to a
computer.