HEIDENHAIN ND 100 User Manual - Manual (Page 27)

ND 120 QUADRA-CHEK 27
1
.2 Basic F
unctions
Menus
Press the MENU key to display menu titles over the soft keys at
the bottom of the LCD screen. Press a menu soft key to display
the corresponding menu screen. Menus include:
Menu titles are displayed over soft keys at the bottom
of the LCD screen
SETUP menu SETUP functions
Press the Setup soft key to
display the collection of
Setup screens used to
configure the DRO. Use of
the Setup menu is
explained in Chapter 2:
Installation, Setup and
Specifications.
Notice
Access to setup menu configuration data fields is
password restricted to supervisors and other technically
qualified personnel. Configuration mistakes can result in
serious measurement errors.
EXTRA menu EXTRA functions
Press the Extra soft key to
display the Extra pop-up
menu. The Extra menu is
used perform many
measurement and data
transmission functions.
Highlight a function and
then press the ENTER key.
Extra menu functions
include:
Annot Toggles between forward
and backward annotation.
DMS/DD Toggles between the
display of degrees,
minutes, seconds and
decimal degrees.
Inch/mm Toggles between the
display of inches and
millimeters.
MCS Clears datums and re-
establishes machine
coordinates.