HEIDENHAIN ND 100 User Manual - Manual (Page 101)

ND 120 QUADRA-CHEK 101
2
.2
S
o
ft
wa
re
s
e
tu
p To assign a function to a hot key:
 Press MENU>Setup to display the Setup menu and then highlight the
Hot Keys menu item.
 Highlight the Keys choice field and then press a soft key to select
the desired key type. In this example the Soft key type is selected.
 Highlight a specific key. In this example soft key 4 is selected.
 Press a soft key to select a function type to assign. In this example
a Special function will be assigned.
 Highlight the specific function and press the ENTER key to complete
the assignment. In this example the Inch/mm function is assigned
to soft key 4. After the assignment, pressing soft key 4 will toggle
between inch and millimeter units of measure.
 Press the FINISH key to return to the Setup menu.
Press a soft key to select a key type Highlight a specific key for assignment Press a soft key to select a function type
Highlight a specific function to assign Press the ENTER key to complete the
assignment