Grass Valley NV9601 v.2.0 - Manual (Page 63)

NV9601 Control Panel • User’s Guide 53
6. Operation
User Definable or Selectable Destinations
User Definable or Selectable Destinations
When a control panel configuration is created, the configurer can choose to have destination
devices definable by the operator, selectable by the operator, or neither. The applies to MD mode
only. The default is to have destinations both definable and selectable.
“User definable” means that the operator can select and then change a destination that appears in
the ‘Lev/Dest’ column. “User selectable” means that the operator can select the device (using the
selection buttons) and preset a new source.
A destination slot is the vertical position of a destination on the display. These slots are assigned
when configuring the control panel.
There is no indication on the control panel whether a destination is user-definable. You can check
the configuration file, simply try it, or speak with the configurer.