Scroll, Source, Source mode – Grass Valley NV9601 v.2.0 User Manual
Page 59: Source/destination mode, Source master, Operation
NV9601 Control Panel • User’s Guide
49
6. Operation
Scroll
Scroll
The Scroll button (default legend
Scroll
) is used for X-Y mode only, although it lights in MD mode
too. The
Scroll
button is used to activate the
Page Up
and
Page Down
buttons enabling you to scroll
through a list of devices that appears in the display area for a specific category. This function is
only enabled when a category button is pressed.
After a category is selected, all devices that belong to that category appear in the display area. Press
Scroll
and then the
Page Up
or
Page Down
button to scroll up or down in the list of devices. The dis-
play area shows up to eight devices at a time. If there are not more than eight devices, the
Page Up
and
Page Down
buttons do not light and are not active.
After you have located the device you want, use the corresponding selection button to select it (see
Source
The Source button is available in X-Y and MD mode. The button has a specific source device
assigned and the button legend reflects the name of the device. When pressed, the source and corre-
sponding levels display. What source is assigned to the button is determined when the panel is con-
figured. For more information, see NV9000-SE Utilities User’s Guide.
Source Mode
The Source Mode button (default legend
Src Mode
) is available in X-Y and MD mode. The
Src Mode
button is the first step in the source selection process. (The second step is to select a Category.)
When
Src Mode
is pressed, the panel lights change to green and all buttons related to source device
selection light.
Source/Destination Mode
The Source/Destination mode button (default legend
Src/Dst
) toggles between source mode and
destination mode.
Source Master
The Source Master button (default legend
Src Mstr
) is available in X-Y mode only. The
Src Mstr
but-
ton forces the direction of routing for devices used in data (machine control routers) takes. This
function is used with machine control (data) routers where there is a master (controlling) device
and slave (controlled) devices. Usually the master routes to the slave. To reverse the order, such that
the slave routes to the master device, press
Src Mstr
before pressing
Take
.
Src Mstr
is used when performing using Broadcast mode (see