Grass Valley NV9601 v.2.0 - Manual (Page 30)

20 Rev 2.0 • 29 Mar 09
3. Viewing and Updating Panel Settings
Viewing Panel Information
Viewing Panel Information
The Panel menu option displays panel information, including panel name, ID, configuration file,
host name, and IP address. This information is used to identify the control panel when creating or
updating panel configurations.
To update the panel ID, you may need a personal identification number (PIN). If you do not have a
PIN number, and you have administrative access rights, contact your system administrator. For
instructions on updating a panel ID, see
Initializing the Control Panel on page 27.
How to view panel information
1 Press the
Menu
button. The display area lists the menu options.
2 Press selection button
3
for ‘Panel’ (see Selection Buttons on page 12).
3 The following appears:
Panel Name — the name assigned to the control panel.
Panel ID — the identification number assigned to the panel.
CFG File — the configuration file currently being run on the control panel.
Host Name — the name of the server acting as “host” for the control panel.
IP Address — the IP address for the control panel itself.
4 Press selection button
7
to exit the Panel menu and return to the main menu page.
5 Press selection button
8
again to exit Menu mode.
Changing Button Illumination
The Illumination menu option changes the brightness of the control panel buttons from low to high.
Select ‘Low’ or ‘High’ as instructed and then use the
Page Up
and
Page Down
buttons to increase or
decrease illumination.
How to change button illumination
1 Press the
Menu
button. The display area lists the menu options.
2 Press selection button
4
for ‘Illumination’ (see Selection Buttons on page 12).
3 The following appears:
Low 1 — illumination from 0% to 90% brightness (Low must be set 10% lower than High).
High 2 — illumination from 10% to 100% brightness.
4 Select
1
for low or
2
for high and press
Page Up
to increase illumination or
Page Down
to
decrease illumination (see Page Scroll Buttons on page 13).
5 Press selection button
7
to cancel without saving changes.
Or
Press selection button
8
to save and exit the Illumination menu and return to the main menu
page.
6 Press selection button
8
again to exit Menu mode.