Grass Valley JSC-2300 SHOT - Manual (Page 52)

52 Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual
Section 4 — Operation
2. Rotate the FOCUS CONTRIOL wheel:
• Counterclockwise for near
• Clockwise for far
Iris Control
1. If the AUTO IRIS indicator is not lit, go to Step 2 . If the AUTO IRIS indicator
is lit, press the AUTO IRIS button. The AUTO IRIS indicator extinguishes.
2. Rotate the MANUAL IRIS wheel:
• Counterclockwise to close
• Clockwise to open
Pan/Tilt Control
Speed
Note This is a variable speed control. When the PAN/TILT SPEED CONTROL is at
the down limit, the control is off. Moving the control up gradually increases
the PAN/TILT speed.
• Move the slider:
• Up to increase pan/tilt speed
• Down to decrease pan/tilt speed
Direction
Note Joystick control of pan/tilt depends on camera mounting and camera/oper-
ator position. Refer to
PAN and TILT Orientation on page 33 .
Pan
• Move the joystick left and right for pan movement
Tilt
Note Joystick control of pan/tilt depends on camera mounting and camera/oper-
ator position. Refer to
PAN and TILT Orientation on page 33 .
• Move the joystick up and down for tilt movement.