Grass Valley JSC-2300 SHOT - Manual (Page 17)

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual 17
Section
1
Overview
The Ignite™ JSC-2300 SHOT Director™ Robotics/Camera Controller
(
Figure 1 ) is a unique, multiple-camera control device combining pan/tilt
and camera control. This SHOT Director controller provides professional-
quality, fingertip control of up to 16 total Ignite SDC/HDC robotic cam-
eras.
Note For questions regarding the installation or operation of the cameras, refer to
the manual included with the camera.
Figure 1. SHOT Director Robotics/Camera Controller
The Ignite SHOT Director controller was designed to provide a single-
camera operator the ability to operate multiple robotic cameras from one
clean, functional joystick console. Camera presets for each camera are
easily programmed and recalled with the push of a few buttons. Focus and
iris settings are adjusted via two wheels located on the left side of the SHOT
Director controller. Twin sliders provide precise, smooth camera control
for variable pan/tilt and zoom speed. The joystick integrates pan, tilt and
zoom into one high quality joystick.
The backlit LCD display provides:
• Camera movement readouts
• Individual camera CCU setting adjustment on the fly without compro-
mising video
• Store and recall up to 300 presets for each of 16 cameras total
The SHOT Director controller utilizes TCP/IP subnet connectivity to
control up to 16 cameras on a single network. Subnetting requires an eth-
ernet hub with enough ports to support the site configuration.