Grass Valley JSC-2300 SHOT - Manual (Page 32)

32 Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual
Section 2 — Functional Description
TCP/IP Network Dialog Box
The TCP/IP NETWORK dialog box ( Figure 20 ) is used to view the connection
status/IP addresses of networked devices. To access it, press the Setup
button, then select TCP/IP NETWORK . It enables a user to view CAM1 through
CAM16 and Ignite systems IGN-A through IGN-F connection status. If a
camera or Ignite system is connected and online, its IP address is displayed.
Otherwise,
OFFLINE is displayed. Select OK to close the TCP/IP NETWORK dialog
box.
Figure 20. TCP/IP Network Dialog Box
SHOT Director Settings Dialog Box
The SHOTDIRECTOR SETTINGS dialog box ( Figure 21 ) is used to access and set
SHOT Director operating characteristics. To access it, press the Setup
button, then select SHOTDIRECTOR SETTINGS . It enables a user to:
Table 1. Pan/Tilt IP Lookup Table
Camera
Number
Default
IP Address
CAM1 192.168.0.111
CAM2 192.168.0.112
CAM3 192.168.0.113
CAM4 192.168.0.114
CAM5 192.168.0.115
CAM6 192.168.0.116
CAM7 192.168.0.117
CAM8 192.168.0.118
CAM9 192.168.0.119
CAM10 192.168.0.120
CAM11 192.168.0.121
CAM12 192.168.0.122
CAM13 192.168.0.123
CAM14 192.168.0.124
CAM15 192.168.0.125
CAM16 192.168.0.126
8 4 9 3_
sc0
6 _r0