Grass Valley JSC-2300 SHOT - Manual (Page 27)

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual 27
Dialog Boxes
Figure 13. Camera Control Home Dialog Box
Note Refer to the camera manual for specific video characteristics adjustments.
HD/SD Camera Dialog Box
The HD/SD CAMERA dialog box ( Figure 14 ) is used to set camera block video
characteristics. Access it any time, from any other dialog box, using the
Menu button. It enables a user to:
Pan: View horizontal plane rotation relative to the camera 0 degree
point
Tilt: View vertical plane rotation relative to horizontal 0 degree point
Zoom: View the value of zoom setting
Focus: View the value of the focus setting
Iris: View the value of the iris setting or AUTO when AUTO IRIS is enabled
Camera: View the active camera for JSC-2300 SHOT Director controller
(also shown in upper-left corner of LCD). The controlled camera
can be changed by using the Camera Quick Select buttons that
correspond to the camera numbers across the bottom of the dialog
box. A specific camera can also be selected by pressing
CAMERA ,
then the camera #, then enter on the keypad.
Preset: View the last camera preset selected.
Control
(bottom
right):
View the absolute position of the joystick and speed controls.
8 4 9 3_
sc00_r0