Pan/tilt ip address dialog box, Figure 17 – Grass Valley JSC-2300 SHOT User Manual

Page 30

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual

Section 2 — Functional Description

Figure 17. Pan/Tilt Softstops Dialog Box

Pan/Tilt IP Address Dialog Box

The

PAN/TILT IP ADDRESS

dialog box (

) is used to set/change pan

and tilt IP, subnet, and SHOT Director controller addresses. To access it,
press the

Setup

button, select

PAN/TILT SETTINGS

, then select

PAN/TILT IP

ADDRESS

. It enables a user to:

Figure 18. Pan/Tilt IP Address Dialog Box

Set the up tilt soft stop

Set the left pan soft stop

Set the right pan soft stop

Set the down tilt soft stop

Pan:

View current Pan position. L or R is displayed in parens
as the camera is deflected left ot right of center.

Tilt:

View current Tilt position. U or D is displayed in parens
as the camera is deflected left ot right of center.

POINTER;

Change the joystick function to a pointer

JOY:

Change the joystick function to a joystick

SAVE:

Save the current pan/tilt soft stop settings

OK:

Close the

PAN/TILT SOFTSTOPS

dialog box

IP:

Set the Pan/Tilt head IP address

sc17_r0