Pan and tilt orientation, Dialog box, Figure 21 – Grass Valley JSC-2300 SHOT User Manual
Page 33
Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual
33
Dialog Boxes
Figure 21. SHOT Director Settings Dialog Box
PAN and TILT Orientation
The SHOT Director controller pan and/or tilt operation can be reversed, if
necessary, to compensate for inverted camera mounting and/or operator
location in relation to the camera. Refer to
.
•
In an upright camera installation:
•
With the operator located behind the camera, changing pan and tilt
operation is not necessary (normal operation is the default).
•
With the operator located in front of the camera, select
REVERSE PAN
.
•
In an inverted camera installation:
•
With the operator located behind the camera, select
REVERSE PAN
and
REVERSE TILT
.
•
With the operator located in front of the camera, select
REVERSE TILT
.
REVERSE PAN:
Reverse the selected camera pan direction from the joy-
stick pan direction (refer to
)
REVERSE TILT:
Reverse the selected camera tilt direction from the joy-
stick tilt direction (refer to
)
BEEP:
Enable/disable audible beep. When enabled, the
numeric value adjusts the beep pitch (0-40).
SHOT DIRECTOR IP
ADDRESS:
Access the
SHOT DIRECTOR IP SETTINGS
dialog box (
Director IP Settings Dialog Box on page 34
SET DEFAULT:
Access the
SELECT DEFAULT SETTINGS
dialog box (refer to
Select Default Settings Dialog Box on page 35
OK:
Close the
SHOTDIRECTOR SETTINGS
dialog box
8
4
9
3_
sc23_r0