Grass Valley JSC-2300 SHOT - Manual (Page 25)

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual 25
Controls and Indicators
Camera Specific Control
These five buttons ( Figure 9 ) are for future enhancements.
Figure 9. System Controls – Camera Specific
Cameras and Presets Control
The camera and preset keypad ( Figure 10 ) is used to:
• Store and recall location presets and views
• Select between cameras in a multi-camera network
• Enter/clear information from the LCD display
Figure 10. System Control – Cameras and Presets
Note Up to 300 presets can be programmed for each of up to 16 controlled cam-
eras.
Back Returns the display to the previously viewed dialog box
Camera Quick
Select
These four buttons are programmable to correspond to four camera numbers. The
assigned camera number appears at the bottom of the
CAMERA CONTROL Home
dialog box and just above each Camera Quick Select button. Pressing and holding
a Camera Quick Select button for 3 seconds erases the current entry.
8 4 9 3_07_r0
8 4 9 3_03_r0