Grass Valley JSC-2300 SHOT - Manual (Page 21)

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual 21
Controls and Indicators
The Ignite system provides TCP/IP automation control (Camera ID and
preset requests) to the SHOT Director controller. The SHOT Director con-
troller interprets the automation controls and transfers the necessary pan/
tilt/focus/iris controls to the camera. The SHOT Director controller also
provides status and preset information to the Ignite system.
Controls and Indicators
The Ignite JSC-2300 SHOT Director robotics/camera controller has five
basic control areas: Lens Control, System Control, Keypad Control Buttons,
Robotics Control, and LCD display. Refer to
Figure 4 .
Figure 4. JSC-2300 SHOT Director Robotic/Camera Controls
Lens Control
The Lens Control area ( Figure 5 ) includes:
8 4 9 3_02_r0