Select default settings dialog box – Grass Valley JSC-2300 SHOT User Manual

Page 35

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual

Dialog Boxes

Select Default Settings Dialog Box

The

SELECT DEFAULT SETTINGS

dialog box (

) is used to set/change

selected SHOT Director operating characteristics to factory default values.
To access it, press the

Setup

button, select

SHOTDIRECTOR SETTINGS

, then select

SET DEFAULT.

It enables a user to:

Figure 25. Select Default Settings Dialog Box

MAC:

View the MAC (Media Access Control) address

DFLT:

Reset the IP address to 192.168.0.100 and the subnet mask
to 255.255.255.0 defaults

SAVE:

Save IP address and SUBNET mask changes

OK:

Close the

SHOTDIRECTOR IP SETTINGS

dialog box

PAN DIRECTION:

Set selected camera default to normal

TILT DIRECTION:

Set selected camera default to normal

SD IP ADDRESS:

Set default to 192.168.0.100

BEEP:

Set default to ON, 20

HOT KEYS:

Set default to CAM1 through CAM4

DEL PRESET:

Erase presets for all cameras

DEFAULT
SELECTED ITEMS:

Reset selected (checked) items to default

OK:

Close the

SELECT DEFAULT SETTINGS

dialog box

sc21_r0