Pan/tilt ip table dialog box, Pan/tilt ip, Pan/tilt ip table – Grass Valley JSC-2300 SHOT User Manual

Page 31: Dialog box

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual

Dialog Boxes

Pan/Tilt IP Table

Dialog Box

The

PAN/TILT IP TABLE

dialog box (

Figure 19

) is used to set/change the

default IP addresses assigned to camera 1 through camera 16. To access it,
press the

Setup

button, select

PAN/TILT SETTINGS

, then select

IP ADDRESS TABLE

It enables a user to:

Figure 19. Pan/Tilt IP Table Dialog Box

SUBNET:

Set the Pan/Tilt head subnet address

CA:

Set the SHOT Director controller IP address

DFLT:

Fill

with the default Pan/Tilt IP address stored in the Lookup

Table

for the currently selected camera (refer to

Pan/Tilt IP Table

Dialog Box on page 31

)

SET:

Send and save

SUBNET

, and

addresses to the Pan/Tilt head

OK:

Close the

PAN/TILT IP ADDRESS

dialog box

Table:

View and select CAM1 through CAM16 default IP
addresses. When selected, the camera ID and current
default address fill in the edit address boxes below the
table.

Edit address
boxes:

Change the default address for the selected camera

DFLT:

Reset the Lookup Table to the defaults listed in

Table 1

SAVE:

Save new table settings

OK:

Close the

PAN/TILT IP TABLE

dialog box

sc1

_r0