Grass Valley 3050 CopperHead - Manual (Page 44)

38
Connection of the System
PowerWafer Scenarios #1 and #2
Fig. 5-3: SMPTE Hybrid Fiber between Base Station and Camera Unit (Infrastructure Wiring)
Panel mounted fiber connectors can be used for permanent installations such as
communications closets, truck connector panels, and sports facilities. A panel mounted
OpticalCON or SMPTE 304M receptacle (4) is connected to the Base Station (1) through
infrastructure grade wiring. Two LC Fiber Optic connectors and four soldered AWG18
copper power wires (3) connect to the Base Station through a Molex and ST receptacle (2).
Between the panel mounted receptacle and the Camera Unit is standard Hybrid Fiber Optic
cable (5). This cable is matched to the panel mounted receptacle with either an OpticalCON
or SMPTE 304M connector (4) to (6).