Area d - signal strength indicators/setup, Area e - status/power indicators – Grass Valley 3050 CopperHead User Manual
Page 29
23
CopperHead 3050
User Guide
Area D - Signal Strength Indicators/Setup
Fig. 3-15: Signal Strength Indicators/Setup
• 8- Signal Strength Readout in dBm: this display changes between display modes
when selected.
• 9- Select Button: chooses between three modes of operation.
• 10 - Readout Function Indicator:
• BASE RX – Optical Link signal strength received at Base Station from Camera Unit
• CAM RX – Optical Link signal strength received at Camera from Base Station
• DIAG – Digital display is in Diagnostic mode
For details on how the setup/Diagnostic functions operate, see
Area E - Status/Power Indicators
Hybrid Power Indicators are present only on a hybrid power unit
Fig. 3-16: Status/Power Indicators
• 11 - System Status Indicators:
• BASE POWER - indicates the status of all power levels in the Base Station:
• Green when all power levels are normal
• Red when any power level is not normal
• SYSTEM LOCK - indicates that the Base Station is communicating with the Camera
Unit:
• Green when communicating with Camera Unit
• Red when it is not communicating with the Camera Unit
• FIBER LINK - indicates the optical power status of the Base Station and Camera
Unit: