Grass Valley 3050 CopperHead - Manual (Page 31)

25
CopperHead 3050
User Guide
CopperHead 3050 Base Station Back Panel
Fig. 3-17: CopperHead 3050 Base Station Back Panel
• A - Power & Fiber Connectors (see Area A - Power & Fiber Connectors (Power Module)
on page 25)
• B - Video/Ethernet Connectors (see Area B - Video/Ethernet Connectors on page 27)
• C - Audio/Intercom Connectors (see Area C - Audio/Intercom Connectors on page 27)
Area A - Power & Fiber Connectors (Power Module)
The CopperHead 3050 Base Station can be configured with one of five different Power
Module Options.
• The connection and practical use of each of these options is covered in Connection of
the System on page 35.
• Multi-pin connector wiring suggestions are covered in Multi-Pin Connectors:
Suggested Wiring on page 72.
External Power Options
Fig. 3-18: External Power with OpticalCON Connector
• External Power with OpticalCON Connector
• 14 - 12V DC External Power Supply input connector (XLR 4 Pin)
• 15 - 12V DC Input - terminal block
See Connector Pin Assignments on page 66 for connection details.
• 2 - For Future Use
• 4 - OpticalCON Connector
• External Power with STs Connector
• 4 - ST Fiber Connectors