Grass Valley 3050 CopperHead - Manual (Page 28)

22
Detailed Description
CopperHead 3050 Base Station Front Panel
Area B - Audio Indicators
LED Indicators to the left side of the label indicate signal paths from the Camera Unit to the
Base Station.The right side LEDs indicate signal paths from the Base Station to the Camera
Unit.
Fig. 3-13: Audio Indicators
• 2 - Program Audio Channels 1-2: monitors Program audio from Camera Unit to Base
Station and Return audio from Base Station to Camera Unit.
• 3 - Intercom Channels 1-2 : monitors Intercom audio from Camera Unit to Base Station
and from Base Station to Camera Unit.
• 4 - Ethernet Signal:indicates IP Data traffic to and from Camera Unit to and from Base
Station.
• 5 - IFB Signal:monitors IFB signal coming from Base Station to Camera Unit.
Area C - Video/Data Indicators
Fig. 3-14: Video/Data Indicators
• 6 - SDI Digital Video Signal: monitors camera SDI video to Base Station and SDI return
video to the Camera Unit.
• 7 - VBS 1-3 – Analog Video Signals 1-3: VBS is typically used for Camera video from the
Camera Unit to the Base Station, and Return video to the Camera Unit from the Base
Station.