Grass Valley Aurora Playout v.6.3 - Manual (Page 55)

September 2007 Aurora Playout User Guide 55
Configuring the Remote Display Unit (RDU)
Color and
Font Text Font Normal
Spaced
Thin
Small Select the text format to display on the RDU.
Normal Color Red
Green
Amber Select the color to display on the RDU during normal
operation.
On-Air Color Red
Green
Amber Select the color to display on the RDU to indicate a GPI
On-Air trigger.
External
Color Red
Green
Amber Select the color to display on an external tally device to
indicate an input trigger.
On-Air and
External Color Red
Green
Amber Select the color to display on the RDU to indicate that both the
GPI On-Air and Tally Input are triggered.
Resource Display ID (1-6) Enter the Display ID number for each channel on the RDU.
The Display ID determines the position of the clip information
on the RDU.
Tally Input (1-2)/Input ID The Tally Input determines the state of the channel, and the
color display associated with the current channel state on the
RDU. Typically, these settings should be left at their default
values. For more information about tally states, please see the
user manual for your RDU-1510.
Display Size Check the Size checkbox to display the clip name with the full
number of characters allowed. If Full is checked, 19 characters
can be displayed. If Full is not checked, 13 characters can be
displayed. (TSI-1000 only.)
Duration Check the Duration box to display the minute and seconds.
Setting Options Description