Grass Valley Aurora Playout v.6.3 - Manual (Page 54)

54 Aurora Playout User Guide September 2007
Chapter 4 Configuring Aurora Playout
Configuring the Remote Display Unit (RDU)
A Remote Display Unit (RDU) lets you see the clips playing on each channel and the
status of each clip. The RDU usually resides in the control room so that operators can
monitor playback status during a broadcast. There are two different RDUs you can use
with Aurora Playout: RDU 1510 or TSI 1000.
Setting Options Description
Type of Display Unit RDU-151
0
TSI-1000 Select your type of Remote Display Unit.
Select Unit 1
2
3 For the TSI, select the unit that you want to use. You can
connect the Aurora Playout system to up to three TSI Remote
Display Units. The default values of these units are 1,2, and 3.
You can configure these to more appropriate names for your
needs.
Control - Com Port
- Machine Name For the RDU 1510, select the Com Port on the Aurora Playout
that the RDU is connected to (usually COM1).
For the TSI 1000, enter the IP address or the host name of the
TSI 1000 machine.