Grass Valley Aurora Ingest v.6.3 - Manual (Page 87)

September 2007 Aurora Ingest System Guide 87
Creating a Template
2. Select Event | Save as Template .
3. Fill in the information that you want included in the template.
• Template Name—Enter the name of the event template.
• Make Public—This option is available if your logon configuration had been
setup to allow you making public templates and filters. The permission to allow
this option for a user is within User Administration setup of Aurora Ingest -
Server. Check the box if you want to set the template as a public template.
• Clip Title—Enter a different clip title if needed. By default, the clip title of the
selected event is automatically entered in this field.
• Router Source—Select a different router source to record from in the dropdown
list if needed. By default, the router source of the selected event is automatically
entered in this field.
• Gang Roll—Click Gang Roll button to select several router sources to start
recording simultaneously as can be seen in the window below:
• Aspect ratio—Select the aspect ratio that you want for the recording of the feed.
This feature is enabled if the option is selected in System tab within Tools |
Options of Aurora Ingest - Server, the user is given permission to switch aspect
ratio and the feed is going to be recorded into K2 version 3.2 controlling SD
channels only.
• Recording Channel—Select a different channel than the one automatically
entered from the selected event if you want. Channel availability depends on
channel group and user logon setup within the Aurora Ingest - Server.
• Clip Location—Select a different record location than the one automatically
entered from the selected event if you want. Availability of record locations
depend on your setup within the Aurora Ingest - Server.