Grass Valley Aurora Ingest v.6.3 - Manual (Page 33)

September 2007 Aurora Ingest System Guide 33
Configuring Routers
4. For Encore router, enter the IP address or name of the router that you want to
connect to. Then, you also need to ensure that the IP address of your Aurora Ingest
Server is entered in the RCL Server configuration of the Encore router control
system.
5. Login to Encore OUI, select App_CPServer and RCL Servers .
6. On the Ethernet Client Names and IP Addresses section of the RCL Server
Configuration window, enter the machine name and IP address of your Aurora
Ingest Server.
7. Logout from Encore OUI and proceed to step 11.
8. When connecting to a Jupiter router, use the ESswitch interface protocol.
9. For Jupiter with direct connection via RS422, select either COM1 or COM2
(depending on your setup) from the COM Port dropdown list.
10. For Jupiter with connection via the serial hub, select the appropriate COM port that
had been configured. For more information, see “Configuring Virtual COM port”