Grass Valley Aurora Ingest v.6.3 - Manual (Page 40)

40 Aurora Ingest System Guide September 2007
Chapter 2 Installing and Configuring Aurora Ingest
Configuring Channels
The number of channels is limited only by your media server hardware. You need to
configure each channel in order to record clips.
To add a channel, click the Add button.
Configure the channel by entering details as below:
Setting Description
Name Enter a name for the channel. This name identifies the channel in Aurora Ingest -
Server and its clients.
Media
Server Select media server for the channel from the dropdown list. (Media servers are
configured in the Media Server tab.)
Channel In the dropdown list, select or enter the name of the media server channel you are
using to record, such as
VTR1, VTR2, VTR3, etc .