Grass Valley Aurora Ingest v.6.3 - Manual (Page 45)

September 2007 Aurora Ingest System Guide 45
Configuring Aurora Ingest - Scheduler (Feed)
Configuring Scheduler in the Aurora Ingest - Scheduler application
After you have configured Scheduler in the Aurora Ingest - Server application, you
need to configure the options in the Aurora Ingest - Scheduler application.
If you have the optional Hauppage WinTVGo video capture card or Blackmagic
Design DeckLink video capture card installed in your scheduler machine and a router
configured in your system, you will need to define the destination of the router
connected (via digital to analog converters, if needed) to your video capture card.
1. In Aurora Ingest - Scheduler, select Tools | Options and the below window displays:
2. If you want to use an Aurora Ingest Server that is hosted on another machine, you
need to specify the server name here. In the Server section of System tab, specify
the Aurora Ingest - Server for your operation.
3. In the Options section, you can select to show a secondary timeline on Aurora
Ingest - Scheduler main window. This feature allows you to display dual time
zones on Scheduler application, which is of great use for global operations.
4. Select the time zone that you need from the dropdown list for your secondary
timeline. Once configured, Scheduler will display both primary and secondary
clock and timelines on the main window.
Default Crash Duration Enter the default duration for any un-scheduled
record event.
Timecode Source Select the timecode source from the dropdown list:
System Time, LTC, or VITC
Setting Description