H3C Technologies H3C S10500 Series Switches - Manual (Page 50)

39
Setting fabric timers
The fabric operation involves the following timers:
• Distributed service timeout period.
• Error detection timeout period.
• Resource allocation timeout period.
For more information about these timers, see FC-related protocols and standards.
You can set fabric timers in one of the following views:
• System view—The configuration takes effect on all VSANs.
• VSAN view—The configuration takes effect only on the VSAN.
If you set a fabric timer in both system view and VSAN view, the setting in VSAN view applies to the
VSAN.
Setting fabric timers in system view
Step Command Remarks
1. Enter system view. system-view N/A
2. Set the global distributed
service timeout period.
fc timer distributed-services value
The default setting is 5000
milliseconds.
3. Set the global error
detection timeout period.
fc timer error-detect value
The default setting is 2000
milliseconds.
4. Set the global resource
allocation timeout period.
fc timer resource-allocation value
The default setting is 10000
milliseconds.
Setting fabric timers in VSAN view
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VSAN view. vsan vsan-id N/A
3. Set the distributed service
timeout period for the
VSAN. timer distributed-services value
The default setting is 5000
milliseconds.
4. Set the error detection
timeout period for the
VSAN. timer error-detect value
The default setting is 2000
milliseconds.
5. Set the resource allocation
timeout period for the
VSAN. timer resource-allocation value
The default setting is 10000
milliseconds.