H3C Technologies H3C S10500 Series Switches - Manual (Page 25)

14
Step Command Remarks
3. Display the FCoE mode of
the switch.
display fcoe-mode Available in any view.
FCoE features supported in different FCoE modes
The switch supports the following FCoE modes: FCF mode, NPV mode, and Transit mode. Each mode
supports different FCoE features, as shown in
Table 1 . You can choose to configure different features
based on the FCoE mode of a switch.
Table 1 FCoE features supported in different FCoE modes
FCoE feature FCF mode NPV mode Transit mode
Configuring VFC
interfaces
Supported. Supported. Not supported.
Enabling FCoE Supported. Supported. Not supported.
Configuring VSANs Supported. Supported. Not supported.
Building a fabric Supported.
Only the Setting fabric timers
function is supported.
Not supported.
Configuring FC routing
and forwarding
Supported.
Only the following functions are
supported:
• Displaying FC routing table
information.
• Displaying FC FIB table
information.
• Display FC Exchange table
information.
Not supported.
Configuring FC zones Supported. Not supported. Not supported.
Configuring NPV Not supported. Supported. Not supported.
Configuring FIP
snooping
Not supported. Not supported. Supported.
Configuring FCS Supported. Not supported. Not supported.
Configuring FDMI Supported. Not supported. Not supported.
Configuring FC ping Supported. Not supported. Not supported.
Configuring FC tracert Supported. Not supported. Not supported.