Setting the fcf priority, Setting the system fcf priority, Setting the vfc interface fcf priority – H3C Technologies H3C S10500 Series Switches User Manual
Page 31: Displaying and maintaining fcoe
20
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set an FKA advertisement
interval value.
fcoe fka-adv-period fka-adv-period The default setting is 8 seconds.
Setting the FCF priority
The FCF priority includes the system FCF priority and the VFC interface FCF priority.
•
System FCF priority—The system FCF priority is used in the fcf priority field in a solicited Discovery
Advertisement.
•
VFC interface FCF priority—The VFC interface FCF priority is used in the fcf priority field in an
unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to the FCF switch for login.
The FCF priority takes effect only on a VFC interface connected to an ENode (VFC interface operating
in F mode).
Setting the system FCF priority
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the system FCF
priority.
fcoe global fcf-priority
priority
The default setting is 128.
The configuration takes effect on all VFC
interfaces operating in F mode.
Setting the VFC interface FCF priority
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VFC interface
view.
interface vfc
interface-number
N/A
3.
Set the FCF priority for
the VFC interface.
fcoe fcf-priority priority
The default setting is 128.
The configuration takes effect only on a VFC
interface operating in F mode.
Displaying and maintaining FCoE
Execute display commands in any view.